home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Ham Radio
/
Ham Radio CD-ROM (Emerald Software) (1995).ISO
/
mods
/
i-jmods
/
ic32at.1
< prev
next >
Wrap
Text File
|
1990-09-05
|
947b
|
23 lines
IC32AT.1
From : WB5RZX @ WB5RZX
Subject : IC-anded xmit range
MODS FOR ICOM 32AT
1. Remove battery and antenna.
2. Loosen two screws on top of unit as much as possible without removing them.
3. Loosen 4 flat head screws on bottom of unit 1 turn.
4. Loosen near PTT switch 1 turn.
5. Remove 4 black screws on back of unit.
6. Lift bottom of front cover .25 inch, slide it down .25 inch, then lift
front cover up 1 inch.
7. Disconnect plug on 4 wires coming from the speaker.
8. Lay front panel on table up-side down being careful of the flex circuit.
9. All mods are done to the back of the front potice places for 5
axial diodes, which I will call 1 through 5, 1 being nearest the display.
Add/remove there are diodes in positions 3 and 5. This will
open up receive coverage for VHF & UHF and enable keyboard entry of the
10 MHz digit.
CONTINUED IN FILE IC32AT.11